Cansa Makina

CMH-114 (NC SYSTEM) http://www.youtube.com/watch?v=MlyBTfJerMg

TECHNICAL SPECIFICATIONS:

HYDRAULIC SYSTEM,
*PIPE BENDING CAPACITY: MAX.114 X 5MM,
*NC SYSTEM (CONTROLLED BY PLC),
*MAX.BENDING ANGLE 190 DEGREE
*ABILITY TO OPERATE MANUALLY OR AUTOMATICALLY
*BENDING ANGLE BY ENCODER
*BENDING CONTROLLED BY HYDRAULIC SYSTEM
*MANDREL CONTROLLED BY HYDRAULIC SYSTEM
*PRESSURE DIE CONTROLLED BY HYDRAULIC SYSTEM
*HYDRAULIC PRESSING
*PLC SCREEN (10”)
*15 BENDING ANGLE MEMORY
*OIL COOLER
*MANUAL OR AUTOMATİCALLY LUBRICATION
*MANDREL LUBRİCATION

CONTROL:
· Error messages, not codes
· Step by step procedures readout
· Single bend feature
· Easy to use and read
· Program resolution .1 degree
· Repeatability is .05 degree

STANDART FEATURES:
· Mandrel extractor
· Wiper die holder
· Manual or automatical lubrication
· Oil cooler

OTHERS:
· Controlled by PLC base, each with maximum of 15 different bending angles.
· 10” color mode display touch screen simplifies the machine operation and function selection.
· Bending motion is sensed and calculated encoder, the angle tolerance is ±0.1
· The pressure die is used to support the bending motion, and has the repeat forwarding and retraction function to minimize the die lenght
· Bending motion is controlled by low speed positioning device to increase the accurancy of desired bending angles. Both manual and automatic operation are available and all machines are equipped with emergency stop device
· One axis numerical controlled of bending-axis by encoder/hydraulic valves
· Bending angle controlled by micro encoder, provides ±0.1 tolerance
· Provides programs memory, each progrom with 10 angles (bends)
· Bending movement time can be programmable to meet different demands.
· 10’’ display touch screen to operate the machine easily.
· Emergency stop of two safety plates with bending arm for working safety


* Max. Diameter (max. O.D.) 114 mm
* Max. Wall thickness 8 mm
* Max. Diameter (max. O.D.) for mild steel 114 mm
* Max. Diameter (max. O.D.) for stailess steel 114 mm
* Max. Diameter (max. O.D.) for profile 110*100*6 mm
* Max. Bending radius different(R) 300 mm
* Max. Bending angle 190 (˚)
* Hydraulic pump motor 30 (kw)
* Max. Hydraulic pressure 240 (bar)

Standard tool:
48x4xCLR140 (bend die+clamp die+mandrel+pressure die)